With a nod to bentwood chairs
It all began with bentwood. Around a century ago, people discovered that when you put wood in a steamer, you could bend it into all sorts of shapes without it splintering. A practical use of that was to make lightweight chairs. And bentwood chairs were very fashionable in the early 20th century
But what should you use for the seat? To keep the chair light rattan was a popular option. British colonialists came across it in Malaya where the rattan plant grows prolifically -- and it is light but strong -- so woven rattan was well known at the time, as you see above. So rattan was also favoured for the seat of Breuer chairs when they arrived
Breuer is the German word for brewer so the chairs are also called brewer chairs. They come from the Bauhaus architectual movement of Germany in the 1920s and 30s -- self-consciously innovative. And they are in fact a bit mad. Innovativeness that leads to no back support!
Aside from looking rather stylish, they are very light: Strong steel tubing plus Rattan seats and backrest. So they have some practicality. They looked very fragile however so the vogue for them did not last long.
Anyhow they had some revival in Australia about 30 years ago. And I bought 8 of them!
As with bentwood chairs before them, however, the seat of the Breuer chairs tended to fail, with a big hole left in the middle. And that is the reason why if you see any bentwood chairs around these days you will see that the seat has been covered with a layer of 3-ply -- not elegant any more but at least usable
I did not pay a lot for my Breuer chairs however -- they came in a flatpack -- so when they failed I did not bother to save them but just threw them out. And I was down to 3 of them left when a tenant moved out of one of my properties and left another 3 behind. They too had obviously concluded that they were not much good. So I now had 6 Breuer chairs again.
They continued to fail however and I continued to throw them out. But I also found a couple at charity shops so restocked a little there.
When I was down to 5 chairs however, I had a rethink. As lightweight chairs they were rather handy and they looked rather interesting so I decided to do what the earlier generation had done with their bentwood chairs. When I was growing up, ALL the bentwood chairs I saw had had their seats repaired with plywood. So I stopped throwing my Breuer chairs out and repaired their seats with plywood. And I even have two with the original seats.
And when the council had one of their rubbish disposal weeks recently, I spied a complete set of them put out by the side of the road. So I took them in. That lot however has upholstered seats so that may be why they lasted better. So why did the owners chuck them out? Maybe they thought the upholstered seats were looking a bit fragile. I guess I will find out.
But, anyway, after about 30 years, I once again have 8 Breuer chairs.
